Showing 21–40 of 40 results

12864 LCD Display 128×64 Pixels Compatible with Arduino, Raspberry Pi

$3.80
Backlight: Blue/Yellow (Optional) Driver: ST7920 View area: 7.0cm(L) x 4.0cm(W) Dots size: 0.48mm (L) x 0.48mm (W) Dots pitch: 0.52mm

1602 LCD Display 2×16 Characters Compatible with Arduino, Raspberry Pi I2C

$0.66$1.13
Built-in industry standard HD44780 or equivalent LCD controller LCM type: Characters Can display 2-lines X 16-characters Supply Voltage: 3-6V Module

1602 LCD Keypad Shield 2×16 for Arduino

$1.39
1. Display: 16 × 2 characters 2. Operating voltage: 4.5-5.5V 3. Operating Current: 2.0mA (5.0V) 4. Module best working voltage:

2.8” 3.5” TFT Touch Display SPI GPIO for Raspberry Pi

$6.89$8.27
2.8 inch SPI TFT Display for Raspberry Pi Resolution: 320×240 Interface: SPI / GPIO Driver IC: ILI9341 Touch: Resistive touch

2.9” ePaper e-ink Display SPI 296×128 3.3V 5V

$11.88
Resolution: 296×128 Gray level: 2 Partial refresh time: 0.3s Full refresh time: 2s Refresh power: 26.4mW(typ.) Standby power:<0.017mW Viewing angle>170°

2004 LCD Display 4×20 Characters Compatible with Arduino, Raspberry Pi I2C

$1.86$2.30
1. Low-power consumption character LCD Module with a built-in controller. 2. The module can be easily interfaced with a MCU.

3.5” – 10.1” HDMI Touch LCD Display 4 5 7 Inch for Raspberry Pi

$12.13$55.80
3.5 inch HDMI Display for Raspberry Pi Resolution: 480×320 Touch: resistive touch screen Dimensions: 85.5×60.6 mm 4.0 inch HDMI Display

74HC595 7-Segment Display Module 2 Digits 0.5” Inch High Bright

$0.71
74HC595 Driver Digital Display Module 0.5 Inch 2 Position Highlight Red 2-Digits 2Digits Led Anode Digital Tube for Arduino 7-Segment

74HC595 Display Module 4 Digits 0.36” Inch

$0.52
4 Bits Digital Tube LED Display Module Four Serial for Arduino 595 74HC595 Driver 7-segment 7segment 4digits 4bits

74HC595 Display Module 8 Digits 0.36” Inch

$1.02
8 Bits Digital Tube LED Display Module Four Serial for Arduino 595 74HC595 Driver 7-segment 7segment 8digits 8bits

AC 70 – 500V 2-Wire Digital Voltmeter 0.56” 110V 220V 230V 380V

$0.53
1. Measurement range: AC 70-500V 2. Power supply range: directly use the measured voltage as the power supply, range: AC

DC 0-100V / 10A 50A 100A Voltmeter Ammeter Module with LED Display

$0.65$2.26
Warning: 10A has built-in shunt. 50A/100A must be connect with external shunt. Working voltage: 4.5-30V DC (input voltage should not

MAX7219 8 Digits 7-Segment Display Module

$0.54
MAX7219 8Digits 8-Digits 7Segment LED digital tube Display Module compatible with Arduino, Raspberry Pi 0.36” inch Supply Voltage 5V SPI

MAX7219 8X32 4 in 1 LED DOT MATRIX DISPLAY

$2.00$2.87
Chip: MAX7219 4x 64 (8×8) LEDs LED dots diameter: 3 mm Operating voltage: 5V Dimensions: 13 x 3.2x 1.3 cm

MAX7219 8X8 LED DOT MATRIX DISPLAY

$0.58$0.79
Chip: MAX7219 64 (8×8) LEDs LED dots diameter: 3 mm Operating voltage: 5V dimensions: 3.2 x 3.2x 1.3 cm 4

MAX7219 DIP 8X8 LED DOT MATRIX DISPLAY

$0.94
Chip: MAX7219 DIP 64 (8×8) LEDs Common cathode Color: Red LED dots diameter: 3 mm Operating voltage: 5V dimensions: 5

Nokia 5110 LCD Display Screen Module

$1.83
LCD Module Display Monitor White backlight adapter PCB 84*48 84×84 Nokia 5110 Screen for Arduino Red blue

TM1637 4 Digits 7-Segment LED Display with Clock 0.36”

$0.40
7Segment LED Display digital tube Module Working Voltage: 3.3V / 5v DC Working Current: 30 / 80MA Size: 42 x

TM1638 8 Digits 7-Segment LED Display Module 8-Bits

$0.90
TM1638 8 Bits Digital Tube LED Display Module for Arduino Driver 7-segment 7segment 8digits 8bits 8 keys 8 LEDs