Showing 1–20 of 44 results

ARM Cortex-M3 32-bit STM32F103C8T6 Minimum System Development Board

$1.19$2.18
STM32F103C8T6 Minimum System Board STM32 ARM Core Module board is a low-cost Minimum System Development Board for ARM Microcontroller STM32F103C8T6 from ST microsystems. It connects with a Micro USB, so easily and simple programming interface with computer/laptop.

ARM STM8S103F3P6 8-Bit Minimum System STM8S Development Board

$0.81
STM8S103F3P6 minimum system board STM8S STM8 development board core board

Digispark Rev.3 Kickstarter with ATTiny85 and USB compatible with Arduino

$2.08
Digispark ATTiny85 is probably the most compact and smallest microcontroller currently available.

DUE R3 SAM3X8E 32-bit ARM Cortex-M3 with Arduino logo

$23.73$23.87
Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU.

ESP-07 ESP07 WiFi Wireless Module

$1.01
ESP8266 ESP-07 Serial WIFI Wireless Module IOT Smart Home ESP 07

ESP-12F ESP-12E ESP-12S ESP-12N WiFi Module

$0.88$1.40
ESP12F ESP12E ESP12S ESP12N WiFi Module ESP12-F ESP12-E ESP12-S ESP12-N WiFi Module

ESP32 2.8 inch Display Development Board

$9.13$10.39
2.8” inch ESP-32 LCD Display Screen ESP-WROOM-32 Resistive Touch TFT ILI9341 Features: Use low-power dual-core 32-bit CPU, which can be

ESP32 Dev Kit C DEVELOPMENT KIT ESP32-DEVKITC-32D

$3.23
100% compatible with Espressif, combines a CPU with 2 Tensilica LX6 cores, clocked at up to 240 MHz, and 512 kiloBytes of SRAM in a single microcontroller. It also integrates a radio unit for WLAN (according to 802.11b/g/n) and Bluetooth (Classic and BLE).

ESP32 LoRa with OLED display 868-915Mhz 433-470MHz HELTEC SX1276 SX1278 Development Board compatible with Arduino

$14.95$16.01
ESP32 (dual-core 32-bit MCU + ULP core), with LoRa node chip SX1276/SX1278; and a 0.96''' OLED display.

ESP32 NodeMCU DEVKIT V1 CP2102 WiFi Development Board 30-pin

$2.96$3.03
The ESP32 Dev Kit is an Arduino compatible Wifi/Bluetooth board. In addition to the 802.11 b/g/n WLAN, the BLE (Bluetooth Low Energy) function enables maximum connectivity with the outside world.

ESP32 NODEMCU Module WiFi Development Board with CP2102 Compatible with Arduino 38-Pin

$3.10
Thhis module has 38 pins and offers more functions than a 30-pin module. And it is smaller and more convenient to use.

ESP32-Cam module (ESP32 Wifi/Bluetooth module including camera) compatible with Arduino

$4.25$4.91
The ESP32-CAM has a very competitive small-size camera module that can operate independently as a minimum system, measuring only 27*40.5*4.5mm, with deep sleep current and a minimum of 6mA.

ESP8266 ESP-01 ESP01 WiFi module

$0.83
The ESP8266 is capable of either hosting an application or offloading all WiFi networking functions from another application processor. Each

ESP8266 ESP-01S ESP01S WiFi module

$0.83$1.40
This is WiFi serial transceiver module, based on ESP8266 SoC which has integrated TCP/IP protocol stack.

ESP8266 OLED WiFi Development Board 0.91” OLED Display CP2102 Support Arduino IDE ESP8266 NodeMCU LUA

$8.99
WiFi Kit 8 is a classic IoT dev-board, it's a highly integrated product based on ESP8266 (Wi-Fi), Li-Po battery management system, 0.91″ OLED is also included. It's the best choice for smart cities, smart farms, smart homes, and IoT makers.

Leonardo R3 Atmega32u4 Development Board Arduino Compatible

$4.00$4.14
Leonardo R3 ATmega32U4 has an integrated USB controller. This board is fully compatible with Arduino.