Features:
1. The flame can be detected or the light source with a wavelength ranging from 760 nm to 1100 nm. The lighter can test the flame at a distance of 80cm, and the larger the flame, the farther the test distance
2. Detection Angle of about 60 degrees, especially sensitive to flame spectrum
3. Adjustable sensitivity (adjustment of blue digital potentiometer in the figure
4. Direct trigger relay of comparator output
5. External dimension: 50×2 6mm, 19mm thick, with fixing bolt hole for easy installation
6. Output with blue wiring block, wiring square
Specifications:
Supply voltage: 5V, 12V dc
Current: greater than 150mA
Load: 250V 10A aC or 30V 10A DC
Directions for use:
1. The flame sensor is sensitive to the flame, is also responsive to sunlight, generally used for fire alarm and other purposes
2. By adjusting the potentiometer, the intensity of sensor induced flame can be set. When the flame exceeds the set threshold, the relay pulls and the common end is connected with the constant start
3. The three ports of common end, normally open and normally closed are equivalent to a double-control switch. When the relay first has electricity the common end conducts with the normal beginning; when there is no eectricity, the common end conducts with the normally closed end
4. Keep a certain distance between the sensor and the flame to avoid temperature damage to the sensor. The test flame is 80CM away from the lighter; the larger the flame, the farther the test distance is
Reviews
There are no reviews yet.