FT232RL FT232BL USB to TTL Serial Adapter Converter Module FTDI

It works great for programming microcontrollers such for Arduino, boarduino, Bareduino, Raspberry Pi, ESP8266, Mini minimOSD, and Atmel Xmega Xplained, Atmega328 mini pro, or any other that can be programmed over serial
After installing the driver,This FTDI TTL adapter will simulate a COM port on your computer/laptop.
Through this simulated COM port, you can communicate or program with various hardware or MCUs, such for Arduino board, Raspberry Pi, ESP8266, router and so on.
Main chip: FTDI FT232BL
Pin Definition: CTS,RTS,RXD,TXD,GND,VCC
Output VCC: 3.3V or 5V
USB interface: 2.0
With 500MA self-recovery fuse reversed does protection
The maximum speed: 921600bps
List of supported systems
Windows xp,7,8,10
Ubuntu 11.10, kernel 3.0.0-19
Mac OS X 10.3 to 10.8 (32 &64 bit)
Mac OS X 10.9 and above(64 bit)
Instructions for use:(Example MCU)
GND: Connect to GND
RXD: Connect to MCU.TX (Signal Flow: MCU.TX Greater than Greater than FT232 Greater than Greater than PC.RX)
TXD: Connect to MCU.RX (Signal Flow: MCU.RX Less than Less than FT232 Less than Less than PC.TX)
3V3/5V: Output 3.3V or 5V (module powered by USB, jumper cap :to 3.3V or 5V)
RTS: Connect to MCU.CTS (Signal Flow Direction: MCU.CTS Less than Less than FT232 Less than Less than PC.RTS)
CTS: Connect to MCU.RTS (Signal Flow: MCU.RTS Greater than Greater than FT232 Greater than Greater than PC.CTS)
Material:plastic
colour:Black+gold
Package Contents:
1 x Adapter Module
1 x 5Pin Dupont Line(Note: Random color, don’t accept the specified color.)